Loading ...
Loading ...
Loading ...
www.BISSELL.com
13
Bare Floor Cleaning
*
With the machine unplugged,
attach the bare floor tool to
the bottom of the machine
by lining the tool to the edge
of the nozzle. Rotate down
until it clicks into place.
Follow filling instructions
on page 10 or 11 and switch
cleaning mode to Express
Clean.
When finished, unplug the
machine and remove the
bare floor tool by rotating
the tool up to unhook
from the nozzle.
Rinse and let dry before
storing. Refer to page 16
for emptying the dirty
water tank. Refer to
page 17 for cleaning your
machine before storing.
Plug into a properly
grounded outlet and press
the power button.
Clean by pressing the
trigger for 1 wet pass
forward, 1 wet pass back,
and then release the
trigger and make 1 dry pass
forward, 1 dry pass back.
WARNING
WARNING: To reduce the risk of fire and electric shock when cleaning a hard floor, the
BISSELL bare floor tool must be used and is only to be used with BISSELL Hard Floor
Solutions formula intended for use with this appliance.
NOTE: The bare floor tool that is compatible with the ProHeat 2X Revolution
is not included. It is available for purchase by contacting our team by phone or
visting us online at BISSELL.com.
*Bare Floor Tool not included with machine.
Important! Please check manufacturer’s tag before cleaning area rugs for
any specialized cleaning instructions. We do not recommend deep cleaning
delicate, silk, wool, antique or area rugs without a manufacturer’s tag.
Area Rug Cleaning
• Check the manufacturer’s tag.
• Select Express Clean Mode.
• When cleaning area rugs, place the rug on a sealed surface to test for colorfastness
in an inconspicuous area. Your cleaner should not be used on unsealed surfaces.
• Important: Keep the foot of the deep cleaner perpendicular to the rug’s edge with
each cleaning pass to prevent damage.
Regularly clean your high-traffic area rugs in Express Clean Mode:
1
2
3
Loading ...
Loading ...
Loading ...