Loading ...
Loading ...
Loading ...
9
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š.
Restrictions when using
This function is available on all hotplates, provided that no other
hotplate in the same group is switched on, (see diagram).
Otherwise, the
› and Š symbols will flash on the display of the
selected hotplate; then the power level
Š is automatically set.
On hotplate 1, the Powerboost function can be activated at any
time.
How to activate
1. Select a hotplate.
2. Press the boost G symbol.
The
› indicator lights up.
The function has been turned on.
To deactivate
1. Select a hotplate.
2. Press the symbol boostG.
The
› indicator will no longer appear and the hotplate will
return to the power level
Š.
The function will be deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
■ to automatically switch off a hotplate.
■ as a timer.
A hotplate should switch off automatically
Enter a cooking time for your dish. The hotplate switches off
automatically once the set time has elapsed.
Setting procedure
1. Select the hotplate and set the heat setting.
2. Touch the 0 symbol twice. ‹‹ y and __ light up in the timer
display.
3. Within the next 10 seconds, set the required cooking time in
the control panel.
The cooking time begins to elapse.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
Select the hotplate and press the
0 symbol twice.
The __ and
r displays appear
Change the cooking time using symbols 1 to 9 or press 0 to
cancel the time.
Notes
■ If a cooking time has been programmed, the display always
shows the time of this function. To check the cooking time
remaining in a hotplate, select a hotplate and press the
0 symbol twice.
■ If a time has been programmed for several hotplates, the
time of the selected hotplate is always shown.
■ Any cooking time can be programmed for up to 99 minutes.
Once the time has elapsed
The hotplate switches off once this time has elapsed. A beep is
heard and
‹.‹ appears in the hotplate and the time
programming function display shows
‹‹ for 10 seconds.
When the
0 symbol is pressed, the displays turn off and the
beep goes off.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
1. Press the 0 symbol. The indicator U lights up. ‹‹ lights up
in the time program function display.
2. Set the required time using symbols 1 to 9.
The time starts again after a few seconds.
Once the time has elapsed
Once the time has elapsed, a beep will sound.
‹‹ and Uare
displayed in the time program function display. After pressing
the
0 symbol, the indications turn off.
Changing or cancelling the time
Press the
0 symbol, the U indicator lights up.
Change the time using the 1 to 9 symbols or press 0 to cancel.
*URXS
*URXS
Loading ...
Loading ...
Loading ...