1. Home
  2. Honda
  3. Honda 2015 CRF450X User Manual
  4. Page 91

Honda 2015 CRF450X Off-road Trail

User Manual - Page 91

For 2015 CRF450X.

PDF File Manual, 182 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
90 Servicing Your Honda
Brakes
Adding Front Brake Fluid
NOTICE
Spilled brake fluid will severely damage
instrument lenses and painted surfaces. It is
also harmful to some rubber parts. Be careful
whenever you remove the reservoir cap: make
sure the reservoir is horizontal first.
r "MXBZTVTFGSFTI%05CSBLFGMVJEGSPNB
sealed container when servicing the system.
Do not mix different types of fluid, they may
not be compatible.
r 5IFSFDPNNFOEFECSBLFGMVJEJT1SP)POEB
DOT4 brake fluid or an equivalent.
(4)
(1)
(2)
(3)
(1) front brake reservoir cap screws
(2) reservoir cap
(3) diaphragm
(4) upper level mark
1. Remove the front brake reservoir cap screws
(1), reservoir cap (2) and diaphragm (3).
2. Fill the reservoir with DOT4 brake fluid to
the upper level mark (4). Do not overfill.
3. Install the diaphragm and reservoir cap.
4. Tighten the front brake reservoir cap screws
to the specified torque:
0.7 lbf·ft (1 N·m, 0.1 kgf·m)
Adding Rear Brake Fluid
NOTICE
Spilled brake fluid will severely damage
instrument lenses and painted surfaces. It is
also harmful to some rubber parts. Be careful
whenever you remove the reservoir cap: make
sure the reservoir is horizontal first.
r "MXBZTVTFGSFTI%05CSBLFGMVJEGSPNB
sealed container when servicing the system.
Do not mix different types of fluid, they may
not be compatible.
r 5IFSFDPNNFOEFECSBLFGMVJEJT1SP)POEB
DOT4 brake fluid or an equivalent.
(5)
(1)
(2)
(3)
(1) rear brake reservoir cap bolts
(2) reservoir cap
(3) set plate
(4) diaphragm
(5) upper level mark
1. Remove the rear brake reservoir cap bolts (1),
reservoir cap (2), set plate (3) and diaphragm (4).
2. Fill the reservoir with DOT4 brake fluid to
the upper level mark (5). Do not overfill.
3. Install the diaphragm, set plate and reservoir
cap. Do not bend to the diaphragm during
installation.
4. Install and tighten the
rear brake reservoir cap
bolts to the specified torque:
0.7 lbf·ft (1 N·m, 0.1 kgf·m)
Other Inspection
r .BLFTVSFUIFSFBSFOPGMVJEMFBLT
r $IFDLGPSEFUFSJPSBUJPOPSDSBDLTJOUIFIPTFT
and fittings.
(4)
(3)
Loading ...
Loading ...
Loading ...