Loading ...
Loading ...
Loading ...
12 EN
5 Listen to the
radio
Tip
•
Position the antenna as far as possible from TV or other
radiation sources.
• Make sure that you have connected the supplied FM
antenna.
• For optimal reception, fully extend and adjust the
position of the antenna.
Tune to a radio station
1
Press FM to select the tuner source.
2 Press and hold / for 3 seconds.
» The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station:
• Press
/ repeatedlyuntilyound
optimal reception.
Store FM radio stations
automatically
Note
•
You can store a maximum of 30 preset radio stations
(FM).
1 In tuner mode, press CLOCK/SCAN
for more than two seconds to activate
automatic programming.
» [AUTO] is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
» Therstprogrammedradiostationis
broadcast automatically.
2 press / to select a preset station.
Store FM radio stations
manually
1
Tune to an FM radio station.
2 Press PROG to activate programming
mode.
» [PROG] (program) blinks.
3 Press ALBUM/PRESET / repeatedly
to select a radio frequency.
4 Press PROGagaintoconrm.
» The frequency of the preset station is
displayed.
5 Repeat the above steps to store more FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
• In FM mode, press / to select a preset
radio station.
Select stereo/mono broadcast
Note
•
Stereo broadcast is the default setting for tuner mode.
• For stations with weak signals: to improve the reception,
change to monaural sound.
• In FM tuner mode, press to switch
between mono and stereo broadcast.
» [STEREO] (Stereo) is displayed when
the radio station is stereo broadcast.
Loading ...
Loading ...
Loading ...