Loading ...
Loading ...
Loading ...
26 27
5. Make sure that the drawers are ush with the door of the oven. If necessary,
carry out the following adjustments:
- Use a 5 mm hex wrench to regulate the drawer fastening mechanism. Turn
it clockwise to move the drawer outwards, turn it anticlockwise to move the
drawer inwards (Fig. 5)
- If the left or right hand sides of the front of the drawer are not perfectly
ush, place a shim behind the drawer support bracket to compensate for any
differences.
Fig. 5
Fig. 5A
IMPORTANT:
- After adjustment is complete, fasten the drawer to the unit using the side
screws and then install the covers (Fig. 5A).
INSTALLATION - Products in 60 cm high recesses
6. Insert the rst 45 cm product next to 60 cm oven that has already been
installed.
• 45 cm Oven:
Align the upper trims of the ovens. If necessary, place shims* under the oven
(Fig. 6) to compensate for any misalignment. Lastly, secure the product using the
screws (Fig. 7)
Fig. 6
Fig. 7
* shims not supplied
Loading ...
Loading ...
Loading ...