Loading ...
Loading ...
Loading ...
9.
Install the right brake caliper and tighten
new mounting bolts.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m).
10.
Install the left brake caliper and tighten
new mounting bolts.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m).
u Take care to prevent the brake caliper
from scratching the wheel during
installation.
u Use new mounting bolts when
installing the brake caliper.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
11.
Lower the front wheel on the ground.
12.
Apply the brake lever several times. Then,
pump the fork several times.
13.
Retighten the left axle pinch bolt.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m).
14.
Raise the front wheel off the ground
again, and check that the wheel rotates
freely after you release the brake.
15.
Remove the protective tape or cloth.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
20170404121238_31MJEC000_enu_BOOK Page 96 Tuesday, April 04 2017 12:17:25 JST
Tire Puncture u Removing Wheels
Troubleshooting
93
Continued
Loading ...
Loading ...
Loading ...