Loading ...
Loading ...
Loading ...
Servicing Your Honda
120
Gear Case Oil
1.
Park the ATV on level ground.
2.
Place an oil drain pan under the oil drain bolt (1).
3.
Remove the oil fill cap (2), drain bolt and sealing washer (3).
4.
After the oil has completely drained, reinstall the drain bolt with
a new sealing washer, and tighten it to the specified torque:
12 N·m (1.2 kgf·m , 9 lbf·ft)
5.
Fill the gear case with the recommended oil.
80 cm
3
(2.7 US oz , 2.8 Imp oz)
6.
Remove the oil level check bolt (4) and sealing washer. Make sure
the oil level reaches the oil level check hole (5).
7.
Install the oil fill cap and tighten it to the specified torque:
12 N·m (1.2 kgf·m , 9 lbf·ft)
8.
Install the oil level check bolt with a new sealing washer and
tighten it to the specified torque:
12 N·m (1.2 kgf·m , 9 lbf·ft)
REAR
(2)
(1)
(1) oil drain bolt (4) oil level check bolt
(2) oil fill cap (5) oil level check hole
(4)
(5)
(3)
(3)
(3) sealing washer
19 TRX250TE1 (ED)-32HS08300.book 120 ページ ２０１８年４月２５日 水曜日 午前１１時４５分
Loading ...
Loading ...
Loading ...