Loading ...
Loading ...
Loading ...
4.2 Powering your remote control
1 Open the battery compartment. Remove the protective plastic tab (first
time users only).
2 Insert 1 x lithium 3V battery, type CR2025, then close the
compartment.
CAUTION
• Batteries contain chemical substances, so they should be disposed of properly.
• Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
• Incorrect use of batteries can cause electrolyte leakage and will corrode the
compartment or cause the batteries to burst.
• Remove the batteries if the set is not to be used for a long time.
• Perchlorate Material – special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
5 Start up
5.1 Setup
1 Press SETUP. A list of features is shown.
2 Use 3 / 4 to highlight your selection.
3 Use J( or )K to enter a sub-menu
4 Use the navigation keys to highlight your desired setting and press OK to confirm.
5 The SETUP menu includes:
General
Language Set On Screen Display (OSD) languages
PBC settings Set Playback Control function ON/OFF. This feature is available for
Super VCD.
Power save Set Power Saving mode ON/OFF
DivX (VOD) Get the DivX (Video-On-Demand) code
Parental Set parental options
Set password Change password (default: 9999)
Factory settings Restore factory settings
Video
TV Display Set screen display aspect ratio
TV standard Set video output format to TV system
Mpeg 4 subtitle Select subtitle language for Mpeg 4 video, e.g. DivX video
Audio
Dolby Set Dolby output
Digital (SPDIF) Set digital output format
5.2 Playback DVD
1 Briefly press POWER on the main control of the player to switch on the set.
2 Open the disc door and insert the disc.
3 The player will start to play the disc automatically.
4 Use navigation keys 1, 2, 3, 4 to select an item from the DVD disc menu, such as
play now, select languages and subtitle.
5 The following functions are available during playback:
Pause Press 2; to pause playback. You can resume playback by pressing 2;
again
Previous/Next Briefly press J( or )K once or several times to select your desired
chapters
Fast backward / Fast forward
Keep pressing J( or )K will search in fast speed, 2X, 4X, 6X… Then,
press 2; to resume normal playback
Volume Control
Press 3 or 4 briefly or repeatedly to increase or decrease the sound
volume
Stop Briefly press 9 on the right side of the player to stop playback
Subtitle Change subtitle display. The function is available by pressing either the
SUBTITLE or OPTIONS key
Language Change language. The function is available by pressing either the
AUDIO or OPTIONS key
Angle Change the viewing angle provided in the DVD disc. The function is
available by pressing the OPTIONS key.
Zoom Zoom in the screen, and then use the navigation keys to pan the
screen. The function is available by pressing either the ZOOM or
OPTIONS key
A-B Repeat Set repeat loop playback. Press A-B to set the starting point and press
A-B again to set the ending point. Then, the player will repeat the loop
playback. Press A-B to cancel the loop playback
5.3 Playback VCD
1 Briefly press POWER on the main control of the player to switch on the set.
2 Open the disc door and insert the disc.
3 The set will start to play the disc automatically.
4 The following functions are available during playback:
Pause Press 2; to pause playback. You can resume playback by pressing 2;
again
Previous/Next Briefly press J( or )K once or several times to select your desired
track
Fast backward / Fast forward
Keep pressing J( or )K will search in fast speed, 2X, 4X, 6X or 8X.
Then, press 2; to resume normal playback
Volume Control
Press 3 or 4 briefly or repeatedly to increase or decrease the sound
volume
Stop Briefly press 9 on the right side of the player to stop playback
Audio Some VCDs only contain 2 languages for selection. You can change the
language using this function. The function is available by pressing either
the AUDIO or OPTIONS key
Zoom Zoom in the screen, and then use the navigation keys to pan the
screen. The function is available by pressing either the ZOOM or
OPTIONS key
A-B Repeat Set repeat loop playback. Press A-B to set the starting point and
press A-B again to set the ending point. Then, the player will repeat
the loop playback. Press A-B to cancel the loop playback
5.4 Playback Super (S)-VCD
(Super) Video CDs may feature PBC (Play Back Control). This allows you to play the
video CDs interactively, following the menu on the display.
1 Briefly press POWER on the main control of the player to switch on the set.
2 Insert the (S)VCD into the disc slot on the right side of the player. If PBC is on, the disc
index menu will appear on the screen.
3 Use numeric keypad 0-9 to input your selection or select a play option.
4 Press RETURN on the remote control to return to the previous menu.
5 To turn Playback Control mode on/off, please go to SETUP and select PBC
settings.
5.5 Playback Music CD
1 Briefly press POWER on the main control of the player to switch on the set.
2 Open the disc door and insert the disc.
3 The set will start to play the disc automatically.
4 The following functions are available during playback:
Pause Press 2; to pause playback. You can resume playback by pressing 2;
again
Previous/Next Briefly press J( or )K once or several times to select your desired
track
Fast backward / Fast forward
Keep pressing J( or )K will enter the fast search mode. Then, press
brief will change the searching speed to 2X, 4X, 6X, 8X, 16x or 32x.
Volume Control
Press 3 or 4 briefly or repeatedly to increase or decrease the sound
volume
Repeat Press OPTIONS key to select Repeat 1 track or Repeat all tracks
Shuffle Press OPTIONS key to turn shuffle playback on or off
Stop Briefly press 9 on the right side of the player to stop playback
5.6 Playback Music MP3/WMA-CD
1 Briefly press POWER on the main control of the player to switch on the set.
2 Open the disc door and insert the disc.
3 The set will start to play the disc automatically.
4 Use navigation keys to select the folder and MP3/WMA file to be played.
5 The following functions are available during playback:
Pause Press 2; to pause playback. You can resume playback by pressing 2;
again
Previous/Next Briefly press J( or )K once or several times to select your desired
track
Fast backward / Fast forward
Keep pressing J( or )K will search in fast speed, 2X, 4X, 6X or 8X.
Then, press 2; to resume normal playback
Volume Control
Press 3 or 4 briefly or repeatedly to increase or decrease the sound
volume
Repeat Press OPTIONS key to select Repeat 1 track or Repeat all tracks
Shuffle Press OPTIONS key to turn shuffle playback on or off
Stop Briefly press 9 on the right side of the player to stop playback
5.7 Playback Picture-CD
The player can only read pictures in JPEG format.
1 Briefly press POWER on the main control of the player to switch on the set.
2 Open the disc door and insert the disc.
3 The set will start to play the disc automatically.
Loading ...
Loading ...
Loading ...