Loading ...
Loading ...
Loading ...
1211
Regulation
EFFECTIS (depending on model)
• Your steam generator is fitted with an iron
temperature control dial.
• Place the iron's temperature control dial according to
the type of fabric to be ironed (see table below).
EFFECTIS Iron temperature setting:
- Start with the fabrics to be ironed at a low temperature
(•) and finish with those which need higher
temperatures (••• or Max).
- Mixed fibre fabric: set the ironing temperature to the
setting for the most delicate fabric.
• If you put the temperature control dial in the “min”
position, the iron does not become hot.
Warning, fabrics with the symbol are not
suitable for ironing.
Important: whenever you start using your iron and
whenever you reduce the temperature during use,
the iron is fully ready for use when its iron light goes
out. During use, when you increase the temperature
of the iron, you can start ironing immediately.
SETTING THE TEMPERATURE AND STEAM OUTPUT ACCORDING
TO TYPE OF FABRIC TO BE IRONED
TYPE OF FABRICS SETTING TEMPERATURE CONTROL
Synthetics, Silk ( polyester,
acetate, acrylic, polyamide)
•
Wool**, Viscose
••
Linen, Cotton
•••
• While ironing, the iron light turn on and off, as the
temperature adjusts without interrupting ironing.
• If you are in doubt about the type of fabric an item of
clothing is made from, check the label.
**If you are ironing woolen garments, press repeatedly
on the steam shot button without placing the iron on
the garment. This will avoid it becoming shiny.
ECO MODE: Your steam generator iron has an ECO
mode function which uses less power whilst still
guaranteeing a sufficient steam flow for you to iron
your garments properly. In order to use this
function, once the Temperature control dial has
been correctly set (see table above), press on the
ECO mode button located on the control panel. The
ECO mode can be used on all types of fabrics,
nevertheless for very thick or very creased fabrics,
we recommend that you use the normal steam
flow for best results.
OK
**If you are ironing woolen garments, press repeatedly on the steam shot button
without placing the iron on the garment. This will avoid it becoming shiny.
Loading ...
Loading ...
Loading ...