Loading ...
Loading ...
Loading ...
Customizing Your Monitor
14
Horizontal
Frequency*
Vertical
Frequency*
BRIGHTNESS
26
48. 4kHz / 60Hz
CONTRAST
26
48. 4kHz / 60Hz
Horizontal
Frequency*
Vertical
Frequency*
For vertical adjustment, select V using the ˘/≥
buttons and adjust the position using the +/–
buttons.
+ . . . to move the picture up
– . . . to move the picture down
5 When you have finished, click [END] on the screen to
turn off the test pattern.
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button twice.
Adjusting the Picture Brightness
Once the brightness is adjusted, it will be stored in memory
for all input signals received.
1 Press the ¨ (brightness) ˘ button.
The BRIGHTNESS OSD appears.
2 Press the +/– buttons.
+ . . . for more brightness
– . . . for less brightness
The OSD automatically disappears after about 3 seconds.
* The horizontal and vertical frequencies for the received input
signal appear in the BRIGHTNESS OSD.
If the screen is too bright when using the monitor in a
dark room
Decrease the BACKLIGHT (page 16).
CENTER
H
V
26
Adjusting the Contrast
Once the contrast is adjusted, it will be stored in memory for
all input signals received.
1 Press the > (contrast) ≥ button.
The CONTRAST OSD appears.
2 Press the +/– buttons.
+. . . for more contrast
–. . . for less contrast
The OSD automatically disappears after about 3 seconds.
* The horizontal and vertical frequencies for the received input
signal appear in the CONTRAST OSD.
Changing or Adjusting the Color
Temperature
The color temperature is set to 9300K at the factory.
You can change the color temperature to 6500K or 5000K.
Use this function to adjust the color temperature so that it
matches the actual colors of a printed picture.
Once the color temperature is adjusted, it will be stored in
memory for all input signals received.
1 Press the MENU button.
The MENU OSD appears.
MENU
MENU
EXIT
PHASE
PITCH
CENTER
COLOR
LANGUAGE
OPTION
MENU
OK
Loading ...
Loading ...
Loading ...