Loading ...
Loading ...
Loading ...
4. Electric wiring for the heater has to be done by the qualified specialist.
OPERATING INSTRUCTION
A. These appliances must be supplied with proper voltage and frequency (AC120V, 60Hz), and
connected to an individual, properly grounded branch circuit, protected by a circuit breaker
which in accordance with wiring rules power cord of this appliance must be fastened with the
chain, installation can only be carried out by qualified person in order to avoid a hazard.
B. Only operate the heater when it is in the upright position. Our Electric Patio Heater is
equipped with One heat settings The switch on the heater head is used to control the One heat
setting. for1500W, the 0 position is off. To operate the heater on high, push the Switch Cord
again. This will cause both the bottom and top heating elements to glow and radiate heat.
ON/OFF rocker switch
After turning on the rocker switch,
press once, the display window shows P0, and the heater is in standby state
press twice, the display window shows P1, and the heater is operating:500W
press three times, the display window shows P2,and the heater is operating:1000W
press four times,the display window shows P3, and the heater is operating:1500W
Loading ...
Loading ...
Loading ...