Loading ...
Loading ...
Loading ...
Using Your Steam Mop Cont’d
2. Grasp by steam mop handle and detent to
begin mopping.
3. Begin cleaning by slowly moving the unit over
the floor surface. Moisture on the floor is normal
when cleaning.
4. When the hard floor cleaner stops emitting
steam, put back into upright position, press
the On/Off button and unplug. Verify if there is
water in the tank. If empty, refill the water tank.
NOTE:To be sure to sanitize an area of your
floor, use the microfiber cloth pads and slowly
and evenly stroke your steam mop back and
forth at least three times over the area using
continuous steam.For best results, remove the
pad and wash after use.
Using the Lift-Off™ Pod
NOTE: When changing from mopping to hand
pod use, press the On/Off button to turn the
steam OFF and wait ten seconds.
1. Make sure the steam is OFF and wait ten
seconds.
2. Press the Lift-Off release button and pull
the hand pod out by handle.
3. With the connector or extension hose
attached to hand pod, connect the tool to
the opening.
4. Turn the tool in order to lock into place.
NOTE: The handheld steam pod will not operate
without the proper attachments. You must have
the connector or extension hose attached in
order for the steam to emit. A safety feature
has been designed to prevent steam emission
without the connector or extension hose.
NOTE: Make sure to turn the steam OFF before
removing or connecting tools and accessories.
Removing All Mop Pads
1. Unplug hard floor cleaner from electrical outlet.
2. Carefully remove mop pad from the mop
pad tray using the Quick Release™ Tab. The
mop pad and tray may be hot.
3. The mop pad can be machine washed in
warm water. Use only liquid detergents. Do
not use fabric softeners or bleach. For best
results, air dry.
www.BISSELL.com
7
Mainnce & Care
WARNING
To reduce the risk of electric shock, turn power switch
o and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
CAUTION
Upright storage of the cleaner with a wet mop pad may
result in the formation of white marks on your floor. To
remove the white marks, clean area with vinegar.
Extension Hose Tool Connector
CAUTION
When removing the steam pod, built up steam may be
released. To avoid possible contact with steam, wait 10
seconds after turning unit o before removing the pod
or tools.
Loading ...