Loading ...
Loading ...
Loading ...
7
8. After brewing is finished there could still be hot water in the filter holder
passing through the ground coffee. This can take 1 to 3 minutes depending
on how much coffee and how fine the coffee was ground. Wait until all
brewed coffee is in the carafe before serving.
9. When the brewing is finished, the machine will keep the heating plate hot
for 2 hours before automatically shutting off. To turn machine off after brewing
press the ON/OFF button again until the power icon light turns off. For optimum
coffee taste, serve coffee just after brewing.
10. If you want to make another carafe of coffee immediately after the first pot,
make sure the machine is off and allow it to cool down for three minutes
before refilling the water tank.
Important: Make sure the carafe is empty before brewing.
11. Always turn the coffee maker off and unplug the power cord from the electrical
outlet when the coffee maker is not in use.
Important: Always use caution when opening the lid directly after brewing,
or when the heating plate is on. Hot steam can rise from inside the machine
and cause injury if contact with skin is made.
Brewing Small Amounts of Coffee
When brewing small amounts of coffee push the 1-4 cup button (Fig. 2, K) until the
icon illuminates on the display. Then push the ON/OFF button to start brewing. The
brewing process will be slowed down to allow the coffee to reach its maximum
aroma. If you pushed the 1-4 cup button by mistake, push it again to turn off this
function.
Setting Auto-On:
If you want the coffee maker to start brewing at a preset time automatically, first
set the auto-on time by pushing the PROG button (Fig. 2, M). The display shows
"6:00 AM". Push the HR and MIN buttons until the desired auto-on time appears.
Within a few seconds the display will revert to the actual time. You may check
the auto-on time by pressing the PROG button.
Note: You may cancel the auto-on function by pressing the AUTO button again
until the icon disappears from the display. If you want to change the automatic
start time, follow the steps above to reset.
Once the programed time is set, fill the water tank and filter and place the empty
carafe with the closed lid on the platform. Push the AUTO button (Fig. 2, P) until
the auto-on icon appears on the display. When the time is due the auto-on icon
will go out, while the power icon will illuminate and the unit will start brewing.
During keep warm mode the power icon will remain illuminated to let you know
that the heating plate is on.
Hint: If you want your coffee at 7:15 AM, set the programmed time to 7:00 (15
minutes earlier). This provides the freshest and hottest coffee possible.
Attention:
• If the machine is unplugged or power is interrupted, all settings described
above must be reset.
• If the machine was set to auto-on and power was interrupted, the machine
will not brew coffee at the programmed time.
Loading ...
Loading ...
Loading ...