Loading ...
Loading ...
Loading ...
EH330, EH430 E and ECC Condensing Unit
Remote Low Side Cuber User Manual
August 2017
Page 3
Technical Specications
Model Electrical
(volts/Hz/phase)
Minimum
Circuit
Ampacity
Maximum
Fuse Size
System
Charge oz of
R-404A
Cabinet Size*
w” x d” x h”
Approx. Unit
Weight (lb)
EH330SL-1E 115/60/1 3 15 - 30 x 24 x 23 130
EH430SL-1E 115/60/1 3 15 - 30 x 24 x 29 165
ECC1200-32 208-230/60/1 17.7 30 248 32 x 39 x 39.75
ECC1410-3 208-230/60/3 11.6 20 248 32 x 39 x 39.75
ECC1410-32 208-230/60/1 15.8 30 248 32 x 39 x 39.75
ECC1800-3 208-230/60/3 19.0 30 232 32 x 39 x 39.75
* See Cabinet Drawings for exact dimensions.
Location Limitations
Maximum Distance between Head and Condensing
Unit: Limited to the length of the longest available
single tubing kit, 75 feet.
Maximum Condensing Unit Elevation over Ice Making
Head: 35 feet.
Note: Elevations greater than 20 feet require
installation of a suction line trap at the 20 foot mark.
Maximum Ice Making Head Elevation over
Condensing Unit: 15 feet.
Line Routing:
• Allowed: One rise after a drop.
• Allowed: One drop after a rise.
• Not Allowed: More than one rise after a drop
• Not Allowed: More than one drop after a rise.
Model Number Locations
Ice Making Head
The dataplate on the back of the ice machine contains
the model number, serial number and electrical data.
A second plate, located behind the front panel at
the lower right front, also lists the model and serial
numbers.
Condensing unit
The dataplate on the condensing unit contains the
model number, serial number, electrical data and
system refrigerant charge.
A second plate, located behind the front panel in front
of the compressor, also lists the model number, serial
number and refrigerant charge.
Loading ...
Loading ...
Loading ...