Loading ...
Loading ...
Loading ...
17
16
RAPID PROGRAMME
The Rapid programme allows a washing cycle to be completed in just 14
minutes! This programme is particularly suited to slightly dirty cottons and
mixed fabrics.
Using the Stain Level button on the Rapid cycle will enable you to select
either a 14, 30 or 44 minute wash cycle.
When selecting the rapid programme, please note that we recommend you
use only 20% of the recommended quantities shown on the detergent pack.
For information about these programmes please refer to the programmes table.
SPECIAL “RINSE” PROGRAMME
This programme carries out three rinses with a intermediate spin (which
can be reduced or excluded by using the correct button). It can be used
for rinsing any type of fabric, eg. use after hand-washing.
SPECIAL “SPIN” PROGRAMME
Programme “SPIN” carries out a maximum spin (which can be reduced by
using the correct button).
DRAIN ONLY
This programme drains out the water.
SPECIAL DELICATE FIBRES
This is a new wash cycle which alternates washing and soaking and is
particularly recommended for very delicate fabrics.
The wash cycle and rinses are carried out with high water levels to ensure
best results.
WOOL & HAND WASH PROGRAMME
This programme allows a complete washing cycle for garments specified as
“Machine-Washable” Wool fabrics and laundry items specified “Hand Wash
Only” on the fabric label.
The programme has a maximum temperature of 40°C and concludes with 3
rinses, one fabric conditioner and a slow spin.
MIXED AND SYNTHETIC FABRICS
The main wash and the rinse gives best results thanks to the rotation
rhythms of the drum and to the water levels.
A gentle spin will mean that the fabrics become less creased.
RESISTANTS FABRICS
The programmes have been designed for a maximum wash and the
rinses, with spin intervals, ensure perfect rinsing.
The final spin gives more efficient removal of water.
MIX POWER SYSTEM
The washing machine is equipped with an innovative pre-mix of detergent and
water. A jet of water under high pressure sprays the mixture directly in the load.
In the initial phase of the wash cycle there are planned spin sequences that, in
conjunction with the high pressure spray, facilitate the penetration of the wash
solution through the fibers thoroughly removing dirt ensuring the best wash
performance.
The spin cycle at the beginning of the wash is a normal phase of the
program and should not be regarded as a malfunction of the machine.
The system also delivers the Mix Power System, during the rinse, the complete
removal of the residues of detergent due to its high pressure water jet, which
invests the laundry.
PROGRAMME SELECTOR
For the various types of fabrics and various degrees of dirt the washing machine has
different programme bands according to: wash cycle, temperature and lenght of cycle (see
table of washing cycle programmes).
PERFECT 20°C – MIX & WASH
This innovative Mix Power System technology, allows you to wash fabrics
such as cottons, synthetics and mixed fabrics at 20°C with a performance
which is comparable to a 40°C wash.
The consumption of this program is about 50% of a conventional 40°C.
Cottons wash.
We suggest a wash load equal to 2/3 of the maximum capacity of the
machine.
This program applies to the washing system "Mix & Wash" which allows you
to wash different fabrics and colours together.
IMPORTANT WASH PERFORMANCE ADVICE
● New coloured garments should be washed separately for at least 5 or 6
washes
● Certain large dark items such as jeans and towels should always be
washed separately
● Never mix NON COLOURFAST fabrics
INTENSIVE 40°C
This program is suitable for cotton garments and achieves excellent cleaning
results at 40°C ensuring the application of fabrics and colors.
DEEP CLEAN 60°C
This program is suitable for cotton garments and has been specially
developed to remove stubborn stains already at 60°C thanks to the Mix
Power System technology.
.
Loading ...
Loading ...
Loading ...