Loading ...
Loading ...
Loading ...
14
US
XBR-49/43X800G only
1 To detach the Table-Top Stand from the TV, remove the screws.
Note
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on
the TV.
• Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the
TV with the LCD panel facing down.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the
original holes on the rear of the TV.
• Place the TV with its screen facing down on a level and stable surface covered with a thick and soft
cloth when removing the Table-Top Stand from the TV to prevent damaging the surface of the LCD
display.
2 Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
Detaching the Table-Top Stand from the TV
Screw (not supplied)
Wall-Mount Bracket (not supplied)
Loading ...
Loading ...
Loading ...