Loading ...
Loading ...
Loading ...
49-1000372 Rev. 1 5
Starting the Freezer
1. Clean the inside of the freezer with a mild solution of
baking soda and water (see Care and Cleaning).
2. Connect cord to power outlet.
3. Make sure the temperature control is set the midpoint
between Cold and Coldest.
4. Allow freezer to operate for at least 6 to 8 hours
before placing food inside.
Operation
Features
USING THE FREEZER: Operation/Features
Freezer Status Lights
RED: The red light will turn on automatically when the
temperature of the freezer is too high, above 23°F (-5°C)
for 60 minutes. It will go off once the temperature is
below 20°F (-7°C).
YELLOW: The yellow light will flash when the red
temperature light is on. You must press the Alarm Reset
Button to turn the yellow light off. If the yellow light is
flashing and the red temperature light is off, you have
experienced a home power loss. You must press the
Alarm Reset Button to turn the yellow light off.
GREEN: The green light is the indicator light and assures
you that your freezer is running. If the indicator light is
not glowing, immediately check for power interruption,
unplugged power cord, open circuit breaker, blown fuse,
or burned out indicator light. If the light is burned out,
contact service for a replacement.
Alarm
Audio alarm indicates that the freezer temperature is too
high.
Alarm Reset Button
Push the Alarm Reset button to turn the alarm off. Once
the button is pushed, the yellow light will stop flashing
and the alarm will shut off.
Temperature Control Dial
Turn using a coin in the slot to adjust the freezer
temperature between Cold and Coldest.
WARNING
Freezer must be unplugged to avoid
electriical hazard from power source when installing,
cleaning or repairing the freezer
Controls
Alarm Reset High Temp Power
Cold Coldest
Yellow Light Red
Light
Freezer Status Lights
Green Light
Temperature
Control
Alarm Reset
Button
/('/LJKW
Loading ...
Loading ...
Loading ...