Loading ...
Loading ...
3 / 4
1x
green
3x
ball tip
red
Re-key the lock (if needed). Install the battery cover.
Conirm that the code(s) added in step 6 can unlock the door.
A B
One green lash with one beep Three red lashes with three beeps
or
IMPORTANT:
Remove battery
pack before
re-keying.
Make sure the door is open. Press
the Program button once.
Locking the Door Unlocking the Door
Enter user code. A total of 16 user
codes may be programmed.
Press Lock button once.
A B C
Did the keypad lash green once with one beep or lash red three times with three beeps*?
D
Each user code
must be a unique
code between 4
and 8 digits.
Programming was successful. Programming was unsuccessful.
Make sure the user code is not a duplicate and that it is between
4 and 8 digits during your next attempt.
Make sure the lock has room for an additional code. If all user code
positions are illed, delete a code to make room for this one.
Press Lock button once. Enter user code.
*Beeping sound will only be heard if switch #3 (on the lock interior) is in the on positon. See “Switches and Status LED Colors” on page 4.
Programming Timeout
During programming, if no button is pressed for ive seconds, the system will time out (indicated by
three beeps and a red lashing keypad), and you will need to restart the procedure.
Mastercode
For enhanced security, a mastercode may be used when adding and deleting user codes. For more information about the mastercode,
download the Programming and Troubleshooting Guide on the SmartCode 913 page at www.kwikset.com.
M
G
S (3x)
K
J
K
a a
b b
c
Re-key the lock
to work with your
existing key. See
the supplied
SmartKey Re-key
instructions for
more information.
Keep “G” in a safe place, as you will need it to access
the back panel for additional programming.
Reinstall
battery
pack.
7
8
6
Add user codes
Re-key the lock (if needed) and install the battery cover
Test the lock (review normal operation)
Loading ...