Loading ...
Loading ...
Loading ...
9
GB
modes which have not started will not be restored and
must be reprogrammed.
Cooking functions
GRILL function
The top heating element is activated. By turning the
TEMPERATURE knob, the different power levels which
may be set will appear on the display; these range
between 5% and 100%. The high and direct temperature
of the grill is recommended for food which requires a high
surface temperature. This function is particularly suitable
for browning food, cooking gratins, colouring meringues,
making toasted sandwiches and grilling small quantities
of thin, lean meat. Always cook in this mode with the oven
door closed.
FAST COOKING function
This function requires the oven to be preheated. This
function is particularly suitable for cooking pre-packed
food quickly (frozen or pre-cooked).
Main Space
Starting the oven
1. Fit the DIVIDER to the DIVIDER shelf D using the pin,
with the arrows turned towards the rear part of the oven.
After it has been fitted correctly, you will be able to read
the text OPENSPACE on the front part of the DIVIDER
frame. A buzzer will sound to confirm that the DIVIDER
has been fitted correctly; it will then be possible to use the
two Main and Small space compartments separately or at
the same time.
The EXTRALARGE SPACE FUNCTION knob will be
disabled.
2. Select the desired cooking function by turning the
MAIN SPACE FUNCTION knob.
3. The oven will begin its preheating stage. The
temperature may be changed by turning the
TEMPERATURE knob. The
indicator light flashes
during the pre-heating stage.
4. Once the pre-heating stage is completed, the
icon
stops flashing (becomes fixed) and a buzzer sounds. It is
now possible to introduce foodstuffs into the oven.
5. During cooking it is always possible to:
- Change the temperature by turning the TEMPERATURE
knob.
- Set the cooking duration in addition to the cooking end
time.
- Stop cooking by turning the MAIN SPACE FUNCTION
knob to the 0 position.
6. If a blackout occurs while the oven is already in
operation, an automatic system within the appliance will
reactivate the cooking function from the point at which it
was interrupted, as long as the temperature has not
dropped below a certain level. Programmed cooking
modes which have not started will not be restored and
must be reprogrammed.
Cooking functions
UNIVERSAL function
All heating elements and the fan are activated. Since the
heat remains constant throughout the oven, the air cooks
and browns food in a uniform manner. A maximum of
three racks may be used at the same time. If you are using
several racks at the same time, we recommend you place
the dripping pan on shelf level 1. If you are cooking on 3
levels at the same time, we recommend you place the
shelves on racks 3 and 5, and the dripping pan on rack 1.
Using the Small Space and Main Space at the
same time
Starting the oven
1. Fit the DIVIDER to the DIVIDER shelf D using the pin,
with the arrows turned towards the rear part of the oven.
After it has been fitted correctly, you will be able to read
the text OPENSPACE on the front part of the DIVIDER
frame. A buzzer will sound to confirm that the DIVIDER
has been fitted correctly; it will then be possible to use the
two Main and Small space compartments separately or at
the same time.
The EXTRALARGE SPACE FUNCTION knob will be
disabled.
In order to improve the ovens energy efficiency, the pre-
heating time of the SMALL SPACE cavity lasts about 15
minutes.
If the MAIN SPACE is set at a temperature below 150°C,
in order to safeguard the cooking results, the grill function
will not start: the display will visualise OFF.
2. Select the desired cooking function for each recess by
turning the SMALL SPACE FUNCTION and/or MAIN
SPACE FUNCTION knobs. The
icon indicates that the
Small Space has been selected and that it is therefore
possible to adjust the Small Space settings; the
icon
lit up on the display indicates that the Main Space has
been selected and that it is therefore possible to adjust
the Main Space settings.
3. Both ovens will begin the preheating stage. The
temperature may be changed by turning the
TEMPERATURE knob. The
indicator light flashes
during the pre-heating stage.
Loading ...
Loading ...
Loading ...