Philips 50BDL3010Q/00 User Manual

Loading ...

2.5.2. ID Remote Control

Set remote control ID number when using several displays.

Press the [ID] button and the red LED blinks twice.

1. Press the [ID SET] button for more than 1 second to enter the ID

mode. The red LED lights up.

Press the [ID SET] button again to exit from the ID mode. The red

LED lights off.

Press the digit numbers [0] ~ [9] to select the display to be controlled.

For example: press [0] and [1] for display No.1, press [1] and [1] for

display No.11.

The available numbers are [01] ~ [255].

2. If no button is pressed within 10 seconds, it will exit from the ID

mode.

3. If a wrong button is pressed, wait for 1 second until the red LED

lights off and then turns on again, then press the correct digits.

4. Press [ENTER] button to conrm your selection. The red LED blinks

twice and then lights off.

NOTE:

• Press the [NORMAL] button. The green LED blinks twice, indicating

that the display is under normal operation.

• It is necessary to set up the ID number for each display before

selecting its ID number.

Loading ...

Philips 50BDL3010Q/00 Qline Display