Loading ...
Loading ...
Loading ...
Before using your Cuisinart
™
Deep Fryer for the first time, remove any dust
from shipping by wiping the base with a moist cloth. Thoroughly clean the
removable bowl, lid, and basket. The removable bowl can be immersed in
water. The lid and basket are dishwasher-safe. Never immerse the base unit
in water; no water is allowed to penetrate the base unit.
ASSEMBLY
INSTRUCTIONS
1. Place base on a clean, flat surface
where you intend to cook.
2. Insert the removable bowl with the
Min/Max marker towards the rear of
the fryer; basket clip in front (Fig. 2).
This is the only orientation that assures
the heating element joins the connector
(Fig. 3).
3. Properly attach the handle to the
basket. Squeeze together both
ends of the handle and insert both
ends into bracket holes. (Fig. 4A)
Gently release grip while keeping
ends in bracket, firmly pull back
handle to snap into position
(Fig. 4B).
4. Make sure unit is turned off at
thermostat dial.
5. Connect the magnetic power
cord to the base unit (Fig. 5).
Never plug cord into outlet
unless magnetic end is attached
to deep fryer.
6. Plug the cord into a standard
electrical outlet.
7. Oil must be added before turning
on fryer. Never operate deep fryer
without oil at least to the Min marker
in bowl.
3
Figure 2
Figure 4A Figure 4B
Figure 3
Figure 5
83359 IB-5722(CDF300)-1 12/22/04 11:57 PM Page 5
Loading ...
Loading ...
Loading ...