Loading ...
Loading ...
Loading ...
Compatible Flash Models
The relationship of XT wireless system and X1 wireless system:
XT-16
(Code Switch)
X1
(Display Screen)
ON
CH01 CH02 CH03 CH04 CH05 CH06 CH07 CH08
X1
(Display Screen)
CH09 CH10 CH11 CH12 CH13 CH14 CH15 CH16
ON O N ON ON O N ON ON
XT-16
(Code Switch)
ON O N ON ON O N ON ON O N
1Dx Mark II 1Dx 5Ds/5Dsr 5DⅣ 5D Mark III 5D Mark II 5D
7D Mark II 7D 6D 80D 70D 60D 50D
40D 30D 750D/760D 700D 650D 600D 550D
500D 450D 400D Digital 350D DIGITAL 100D 1200D 1000D
1100D M5 M3
1. This table only lists the tested camera models, not all Canon EOS series cameras. For the compatibility
of other camera models, a self-test is recommended.
2. Rights to modify this table are retained.
3. The cameras which are released before 2012 do not have TTL mode in their D and E group.
This flash trigger can be used on the following Canon EOS series camera models:
Technical Data
Compatible Camera Models
- 46 -
- 45 -
Model
Compatible cameras
Power supply
Flash Exposure Control
TTL autoflash
Manual flash
Stroboscopic flash
Function
High-speed sync
Flash exposure
compensation
Flash exposure lock
Focus assist
Modeling lamp
Beeper
Wireless setting
ZOOM setting
TCM function
Firmware upgrade
Memory function
XProC
Canon EOS cameras (E-TTL II autoflash)
Support for the cameras that have PC sync socket.
2*AA batteries
E-TTL II
Yes
Yes
Yes
Yes
Yes, ±3 stops in 1/3 stop increments
Yes
Yes
Control the modeling lamp by the flash trigger
Control the beeper by the flash trigger The receiver end can control the
camera shooting through the 2.5mm sync cord jack
Adjust the ZOOM value by the transmitter
Transform the TTL shooting value into the output value in the M mode
Upgrade through the Type-C USB port
Settings will be stored 2 seconds after last operation and recover
after a restart
Loading ...
Loading ...