User Manual Thermos F3100PP6 FUNTAINER 10 Ounce Stainless Steel Vacuum Insulated Kids Food Jar, Paw Patrol - Boy

Documents for Thermos F3100PP6

The following documents are available:
CARE AND USE GUIDE
FUNTAINER WATER BOTTLE AND FOOD JAR (F410, F411, F310)
GENERAL CARE
Before first use, and as soon as possible after each use, wash all parts with warm, soapy water. Rinse
all parts thoroughly and allow time to dry.
Contents should not be left in the container for longer than 24 hours. As soon as possible after each and
every use, wash all parts with warm, soapy water. Rinse all parts thoroughly with clean water.
Allow all parts to dry completely prior to next use or storage.
DO NOT use abrasive cleaners or scrubbers since they may dull the finish.
DO NOT use bleach or cleaners containing chlorine on any parts of the product.
This product is top-rack dishwasher safe; however, washing by hand is recommended as the
dishwasher uses harsher detergents and hot water that may affect the appearance of your product.
Residual contents may become trapped between parts, under gaskets (flexible band around lid and/or
stopper), or in straws. Although this products is top-rack dishwasher safe, washing by hand is
recommended to ensure that these parts of the product are thoroughly cleaned.
For maximum thermal insulation efficiency, preheat (Food Jar only) or pre-chill (Food Jar and Bottles)
the product just prior to use. Fill with hot/cold tap water, attach lid, let stand 5 to 10 minutes and empty.
After filling container with contents, re-cover with lid to increase thermal efficiency. Never use a
microwave, conventional oven, or other heat source for this purpose.
ASSEMBLY & USE
Food Jar:
1. Remove lid (A) by twisting counterclockwise.
2. Remove spoon (D) (if present) by pulling up on it.
3. Remove o-ring gasket (B) from underside of lid (A).
4. Wash all parts separately, then re-assemble o-ring gasket (B) with flat side facing lid (A).
a. Ensure gasket (B) is properly seated to minimize leaking.
5. Fill container with contents. Do not overfill: Leave space for the lid (A), to avoid overflow.
6. Replace lid (A) by twisting clockwise.
See WARNINGS Section below for further details.
Loading ...
Loading ...
Loading ...