Loading ...
Loading ...
Loading ...
29
12 Product Troubleshooting
This chapter describes problems that you may encounter while using the MaxiAP
AP200H.
Vehicle Linking Error
A communication error occurs if the MaxiAP AP200H fails to communicate with the
vehicle's control module when performing diagnostic procedures.
Please do the following check-ups:
Verify that the ignition is ON.
Check that the MaxiAP AP200H connector is securely connected to the vehicle's
DLC.
Turn the ignition off and wait for about 10 seconds. Then turn the ignition back on
and continue the operation.
Verify the control module is not defective.
Loading ...