Loading ...
Loading ...
Loading ...
Troubleshooting en
51
Fault Cause and troubleshooting
Removable streaks
are present on
glasses, glassware
with a metallic appear-
ance and cutlery.
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
▶ Only remove large remnants of food and do not
prerinse tableware.
▶ Adjust the sensitivity of the sensors.
→"Sensors", Page11
Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades
are often more severely affected.
▶ Use rust-resistant tableware.
Cutlery may also rust if washed together with rusting
items.
▶ Do not wash rusting items.
Salt content in washing water is too high.
1. Remove any spilled special salt from the tub.
2. Screw the cap of the special salt dispenser on tight.
Detergent residue is
present in the deter-
gent dispenser or the
tablet collecting tray.
Spray arms were blocked by tableware so detergent
was not rinsed out.
▶ Check that the spray arms are not blocked and can
rotate freely.
Detergent dispenser was damp when detergent was
added.
▶ Only add detergent to a detergent dispenser when
dry.
Special salt refill indic-
ator lights up.
Insufficient special salt.
▶
Add Special salt →Page27.
Sensor does not detect special salt tablets.
▶ Do not use special salt tablets.
Loading ...
Loading ...
Loading ...