Loading ...
Loading ...
Loading ...
13
English
Press and hold Wi-Fi SETUP on the back
of DS3800W for more than 5 seconds.
» The Wi-Fi SETUP indicator blinks
green and yellow alternately.
» A new Wi-Fi network created by
DS3800W will appear, with the network
name (SSID) of Philips Fidelio AirPlay.
» It may take up to 45 seconds for
successful creation of this new Wi-Fi
network.
Note
the new Wi-Fi network created by DS3800W will
disappear.
If you fail to enter Assisted Wi-Fi Setup mode, power
off DS3800W and power on it, then try again after
successful boot-up.
Make sure that there are no other Philips AirPlay-
enabled devices in Assisted Wi-Fi Setup mode at the
same time. Multiple Wi-Fi networks created this way
may interfere with each other.
6 Restore your Wi-Fi enabled device back
to your existing home Wi-Fi settings (see
‘Restore your Wi-Fi enabled device back to
your existing home Wi-Fi setting’ on page 17).
Collect settings of your home Wi-Fi
router
Note
Always consult the user manual of your home Wi-Fi
router for detailed instructions.
1 Connect your Wi-Fi enabled device to
your existing home Wi-Fi network.
2 Launch the Internet browser (for example,
Apple Safari or Microsoft Internet
Explorer) on your Wi-Fi enabled device.
3
home Wi-Fi router.
4 Find the Wi-Fi settings tab and write down
the following information on paper:
A Network name (SSID)
B Wi-Fi security mode (usually WEP,
WPA or WPA2 if enabled)
C Wi-Fi password (if Wi-Fi security is
enabled)
D DHCP mode (enabled or disabled)
E Static IP address settings (if DHCP
mode is disabled)
Switch DS3800W to Assisted Wi-Fi
Setup mode
Note
Before you press any button on DS3800W, make sure
that DS3800W has been booted up successfully (see
‘Turn DS3800W on’ on page 10).
EN
Loading ...
Loading ...
Loading ...