Loading ...
Loading ...
Loading ...
Sound Adjustments
51
TV Virtual Surround Sound
Settings (TVS)
When you connect a stereo TV or 2 front
speakers, TV Virtual Surround lets you enjoy
surround sound effects by using sound
imaging to create virtual rear speakers from
the sound of the front speakers (L: left, R:
right) without using actual rear speakers.
This function is designed to work with the
LINE OUT L/R (AUDIO) 1/2 jacks.
Note that if you select one of the TVS settings
while playing a DVD, the player does not
output Dolby Digital signals from the
DIGITAL OUT (COAXIAL and OPTICAL)
jacks (when you set “DOLBY DIGITAL” in
“AUDIO SETUP” to “D-PCM”) (page 75).
1
Press DISPLAY during playback.
The Control Menu appears.
2
Press X/x to select
(TVS), then press ENTER.
The options for “TVS” appear.
3
Press X/x to select one of the TVS
(TV Virtual Surround) sounds.
Refer to the following explanations
given for each item.
NTVS DYNAMIC
NTVS WIDE
NTVS NIGHT
NTVS STANDARD
4
Press ENTER.
To reset the TVS setting
Select “OFF” in Step 3.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
TVS (TV Virtual Surround) DYNAMIC
Uses sound imaging to create virtual rear
speakers from the sound of the front speakers
(L/R) without using actual rear speakers
(shown below). The sound imaging effect is
distinct and clearly reproduces each aural
element of the audio track.
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
ENTER
X
/
x
DISPLAY
SURROUND
TVS DYNAMIC
OFF
TVS WIDE
OFF
1 8
(
3 4
)
1 2
(
2 7
)
T
1 : 3 2 : 5 5
DVD
VIRTUAL 3D SURROUND
PLAY
TV
continued
Loading ...
Loading ...
Loading ...