Loading ...
Loading ...
Loading ...
21
Site Preparation
Note: It is recommended that a thorough site
inspection be conducted PRIOR to unpacking
and moving this appliance.
• WARNING: DO NOT use the handle or oven
door to lift the oven. Remove door before
installation to ensure that it is not used to lift
the unit. Make sure pins are inserted into
hinges before removing door to prevent
personal injury to hands and/or fingers. Do
not lift or carry the door by the handle.
• Confirm available access to adequate power –
see electrical requirements.
–Single oven units require a 30 amp circuit
–Double oven units require a 50 amp circuit
Note: A minimum of 2” spacing above and
below the oven to any other adjacent items is
required for ventilation purposes. DO NOT
install two or more wall ovens single or double
side-by-side or stacked one on top of the other.
• It is recommended that 3/4” or larger material
be utilized to create a support platform for this
appliance.
• BE SURE that support for this appliance is
perpendicular to the front facing of the wall or
cabinet before you perform the installation.
• Use of a hydraulic lift is recommended for the
installation of double oven units.
• All openings in the wall behind the appliance
or in the floor under the appliance should be
sealed.
• Keep appliance area clear and free from
combustible materials, gasoline and other
flammable vapors.
• WARNING: DO NOT USE AN EXTENSION CORD
WITH THIS APPLIANCE. SUCH USE MAY RESULT
IN FIRE, ELECTRICAL SHOCK OR OTHER
PERSONAL INJURY.
1
2
Installation Procedure (Select / Premiere Models)
Remove wooden brace on front of pallet. Open door completely. Place pin in pin hole.
Installation
Loading ...
Loading ...
Loading ...