Loading ...
Loading ...
Loading ...
Problem Solution
The appliance
cannot be
switched on.
All functions except the blender only work when
the blender cap is assembled on the motor unit.
Check whether the blender cap is assembled
properly on the motor unit (see page 25). If you
want to use the food processor, check whether the
lid is properly assembled on the bowl (‘click’). If
you want to use the citrus press, check whether
the cone is assembled properly in the sieve (see
picture on page 49). If you want to use the blender,
make sure the blender jar is assembled properly on
the motor unit.
The appliance
suddenly stops
running.
The thermal safety cut-out has probably cut off the
power supply to the appliance because the
appliance has overheated. 1) Unplug the appliance
2) Let the appliance cool down for 60 minutes 3)
Put the mains plug in the socket 4) Switch on the
appliance again.
Dirt has
entered the
Click & Go
button.
Take the lid off the bowl, unscrew the Click & Go
button by turning it anticlockwise and clean the lid
in the dishwasher. If there is still dirt in the Click &
Go button, clean the lid in the dishwasher a second
time. If you do not have a dishwasher, you can also
let the lid soak in warm water with some washing-
up liquid for a while and then rinse it in fresh water.
EN
|
Troubleshooting
Problem Solution
The food
processor does
not work.
All functions except the blender only work when
the blender cap is assembled on the motor unit.
Check whether the blender cap is assembled
properly on the motor unit (see page 25). Also
check whether the lid has properly locked into
place on the bowl (‘click’).
Both the
blender jar and
the food
processor bowl
are attached,
but only the
blender works.
If both the blender jar and the food processor
bowl have been assembled correctly, only the
blender works. If you want to use the food
processor bowl, remove the blender jar and
assemble the blender cap onto the motor unit (see
page 25).
The citrus press
does not work.
All functions except the blender only work when
the blender cap is assembled on the motor unit.
Check whether the blender cap is assembled
properly on the motor unit (see page 25). Also
check whether the cone is assembled properly in
the sieve.
The blender
does not work.
Check whether the blender jar is assembled
properly on the motor unit.
82
Loading ...
Loading ...
Loading ...