Loading ...
Loading ...
Loading ...
Connections
7.5.2 Decoder channels
Decoders that decode an antenna channel are
connected to EXT1 or EXT2 (scart).
You have to assign the TV channel as a channel to
be decoded.Then assign the connection where the
decoder is connected.
‡ Press Menu Ï on the remote control and
select Setup > Installation > Decoder >
Channel.
® Press π to enter the list.
Ò Press o or œ to select the channel to decode.
† Press p and go back to select Status.
º Press o or œ to select the connector used by
the decoder.
◊Press Menu Ï to quit the menu.
7.6 Preparing for digital
services
Scrambled digital TV channels can be decoded with
a Conditional Access Module (CAM) and a Smart
card provided by a digital TV service operator.The
CAM may enable several services depending on the
operator you choose (e.g. Pay TV).
Contact your digital TV service operator for more
information and terms.
7.6.1 Insert a Conditional Access Module -
CAM
) Warning
Switch off the TV hub before inserting the CAM.
Look on the CAM for the correct inserting
direction. Incorrect insertion can damage the CAM
and the TV.
‡ Gently insert the CAM into the Common
Interface slot at the side of your TV hub as far
as it will go.
® Leave the CAM in the Common Interface slot
permanently.
It can take a few minutes before a CAM is
activated. Removing the CAM will deactivate the
digital TV service.
7.6.2 Common interface menu
From this menu you access the CAM service you
have installed.The applications and their function,
the content and the messages on screen come
from the CAM service provider.
‡ Press Menu Ï on the remote control and
select Features > Common interface.
This menu option is available when a CAM is
inserted and has made contact with the provider.
In
s
t
a
ll
a
ti
on
D
ecoder
C
hanne
l
Status
...
C
onnections assist
.
Pr
e
f
e
r
e
n
ces
R
e
n
a
m
e
de
vi
ces
D
ecoder
M
a
n. n
e
tw
o
rk in
s
t
.
C
loc
k
Factor
y
settin
g
s
37
ENGLISH
2730.3 en 05-03-2009 15:15 Pagina 37
Loading ...
Loading ...
Loading ...