Loading ...
G10-212
*
www.tissot.ch
158_EN / 10.15
2/7
Acknowledgements
Thank you for choosing a chronograph from TISSOT®, a Swiss brand among the most highly renowned in the world. Meticulously designed, using only the
highest quality materials and components, your chronograph is protected against shock loads, variations in temperature, water and dust.
This user manual applies to TISSOT® quartz chronographs with a G10.212 movement, and is divided into several model-specific chapters.
The Chronograph model enables you to measure events lasting up to 30 minutes, and offers you the following functions:
• Standard chronograph function (START/STOP);
• “ADD” function (partial times);
• “SPLIT” function (intermediate times).
The Football model enables you to time football matches, and offers you the following functions:
• Half counter;
• Added time counter;
• Extra time counter.
To ensure that your chronograph operates with perfect precision for many years to come, we advise you to pay careful attention to the advice given in this
user manual.
Chronograph model - Use
Model with a screw-down crown
To ensure even better water resistance, certain models are fitted with a screw-down crown. Before setting the time or date, you must first unscrew the
crown to position IB, so that you can pull it out to position II or III.
Important! After every operation, the crown must be screwed back down to maintain the water-resistance of the watch.
Setting the time
• Pull the crown out to position 3, and turn it forward or backward to set the desired time.
• Synchronise the small seconds hand at 6 o’clock with an official time signal (radio/TV/Internet), by pulling the crown out to position 3; the hand will stop.
Once the time is synchronised, push the crown back into position 1.
Winding
Quartz watches do not need to be wound.
Setting the date
• Pull the crown out to position II and turn it anticlockwise until the desired date is displayed.
Simple timing
The «simple timing» function enables you to measure isolated events.
START, press A
STOP, press A
Time readout (as per example opposite):
- 5 minutes,
- 57 seconds,
- 7/10ths of a second
Reset, press B
START, press A
STOP Readout, press A
RESTART, press A
STOP Readout, press A
RESTART, press A
STOP Readout, press A
Reset counters, press B
NB: before each timing operation, the chronograph hands must be at their start points. If necessary, refer to the “Resetting the counters” paragraph.
Note: all the timing functions are available with the crown pressed into position I.
Tachymeter (depending on model):
The tachymeter allows you to measure the speed of an object moving at a constant speed. Start the chronograph and then stop it when you have travelled a
distance of 1 km; the chronograph hand will be pointing to a number on the tachymeter scale indicating the speed in km/h.
ADD function (partial times)
The “ADD” function enables you to measure consecutive events without having to reset in between. Each time is added to the previous total.
30
20
10
60
40
20
31
A
B
30
20
10
60
40
20
31
A
B
Loading ...
Loading ...
Loading ...