Loading ...
Instructions
4
READ BEFORE USE
IMPORTANT INSTRUCTIONS
GAS/ELECTRIC COOKERS
Gas/Gas Cookers:
• To avoid overheating when the oven or
grill is being used, the glass cover must
always be up.
• The glass cover may not be cooked on,
or closed when the burners are in use
and while they are still warm.
• The gas oven and gas grill cannot be
used simultaneously.
All Cookers:
• Never place aluminium or foil at the
bottom of the oven and do not place
oven trays as this may damage the
enamel coating by overheating.
• The manufacturer declines all
responsibility for improper use.
• Never attempt to repair or install the
appliance yourself as the warranty will
become void.
• Installation must be done by a qualified
gas installer and qualified electrician.
• Retain your proof of purchase for
guarantee.
Additional installation information for
SMEG gas hobs and stoves supplied to
South Africa
All Smeg appliances comply with SANS
1539 and have been issued with Permit
numbers by the Liquefied Petroleum Gas
Safety Association of Southern Africa.
Gas Type: LPG (Note: This appliance may
have been supplied ex factory with setting
and jets for Natural Gas. Your installer must
make the necessary changes and
adjustments before handing over the
installed appliances for use).
Operating Pressure: 2.8 kPa. Note that this
appliance may only be used with a LPG
regulator of 2.8 kPa outlet pressure and that
complies with requirements of SABS 1237.
• This appliance may only be installed by
a qualified Gas Fitter that is registered
with the LPGSASA. All registered Gas
fitters are provided with an identity card,
which also carries their registration
number. Make a note of this. The Gas
Fitter should also provide you with a
written certificate after completing the
work. Before the installer hands over the
installed appliance ensure that you are
informed of the location of the isolation
or shut off valve in the gas supply line to
the appliance and how to operate it.
• Do not modify the appliance in any way
as this may make it unsafe.
Loading ...
Loading ...
Loading ...