Loading ...
Loading ...
Loading ...
Settings
103
Setting the water hardness
Select the water hardness level in
your area and confirm with OK.
AutoDos (automatic dispens-
ing)
If you later wish to change the fill level
or dispensing amount of the PowerDisk,
you can adjust the pre-set values ac-
cording to the information on the pack-
aging.
These settings are important in order for
the PowerDisk almost empty message to
be displayed correctly. These settings
have no influence on the amount of de-
tergent dispensed in each wash pro-
gram.
Setting the Fill level PowerDisk
The PowerDisks currently available con-
tain 400g of detergent.
Select the Fill level PowerDisk menu op-
tion and confirm with OK.
Enter the PowerDisk fill quantity and
confirm with OK.
Setting the Dosage amount
The PowerDisks currently available dis-
pense approximately 7g of detergent
per rotation.
Select the Dosage amount menu op-
tion and confirm with OK.
Select the dispensing quantity of the
PowerDisk and confirm with OK.
Rinse Aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6ml.
3ml is the factory default setting.
The rinse aid dosage can turn out to be
higher than the set value due to the au-
tomatic adjustment of the program.
If spots appear on dishes and glass-
ware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
dishes and glassware:
- Decrease the rinse aid dosage.
Loading ...
Loading ...
Loading ...