Loading ...
Loading ...
Loading ...
en Installation and connection
12
Sensor setting Description
SE:00 Optimum setting for a
mixed load and heavily
soiled tableware. Saves
both energy and water.
SE:01 Adjusts the programme
strength for effective re-
moval of food remnants
even with low soiling
levels. Energy and water
consumption are adjusted
accordingly.
SE:02 Adjusts the programme
strength for difficult condi-
tions of use, e.g. stubborn
dried-on food remnants.
Recommended setting
when using organic or eco-
logical detergents contain-
ing low levels of active
agents. Energy and water
consumption are adjusted
accordingly.
Installation and connection
Installation and connec-
tion
Installation and connection
Scope of supply
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note:The appliance was tested at
the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
¡ Dishwasher
¡ Instruction manual
¡ Installation instructions
¡ Warranty
1
¡ Installation material
¡ Steam guard plate
1
¡ Rubber apron
1
¡ Mains cable
¡ Quick reference guide
1
Installing and connecting the
appliance
You can position your appliance in a
fitted kitchen between wooden and
plastic walls.
1. "Follow the safety instructions."
→Page4
2. "Follow the instructions for elec-
trical connection." →Page13
3. Check the "Scope of supply"
→Page12 and the condition of
the appliance.
4. Consult the installation instructions
for the installation dimensions re-
quired.
5. Set the appliance up so it is level.
Make sure that the appliance is
standing on the floor securely.
6. "Install the drainage connection."
→Page13
7. "Install the drinking water connec-
tion." →Page13
8. Connect the appliance to the
power supply.
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...