Loading ...
Loading ...
Loading ...
61
PROGRAMMING MODE - TEST MODE
ENGLISH
PROGRAMMING MODE -
TEST MODE
Diagnostic tests: (display)
This program has been added for testing the washer and detecting errors.
1.
According to pressing Start button, test move to the next step.
Entering the test mode
Data Name Button Display Description
Entering
the test mode
1. Entering
programming mode
Insert service card (card type), turn on/off
toggle switch (card type).
2. Hot
Press the Hot button. Then appears
in the display.
3. Start Enter the diagnostic test mode.
Number of times the
START button is pressed
Check Point Display
None
1 time
Turns on all lamps and locks the
door
Displays 1U:XX, 1g:XX and 12:XX
alternately (Version)
2 times Tumble Clockwise. rpm (40~50)
3 times Low Speed Spin rpm (600)
4 times High Speed Spin rpm (1150)
5 times Inlet valve for main water turns on. Water level frequency (255~)
6 times Inlet valve for hot wash turns on. Water level frequency (255~)
7 times Inlet valve for bleach turns on. Water level frequency (255~)
8 times Inlet valve for atomizing turns on. Water level frequency (255~)
9 times Tumble counter clockwise. rpm (40~50)
10 times Turn on Circulation Pump. Water level frequency (255~)
11 times Drain Pump turns on. Water level frequency (255~)
12 times Turns on all lamps.
Displays 1U:XX, 1g:XX and 12:XX
alternately (Version)
13 times Button Checks.
14 times High Speed Spin rpm (1150)
15 times
PDA Signal Check
this function is not applied in this
machine
16 times
NOTE
• Make sure the drum is empty when a diagnostic test is performed. Do not use
.
Loading ...
Loading ...
Loading ...