Loading ...
Loading ...
Loading ...
Servicing Your Honda
152
Spark Plug
6.
Discard the spark plug if there is apparent wear or if the insulator
is cracked or chipped.
7.
Using a wire-type feeler gauge, check the spark plug gap (4). If
adjustment is necessary, bend the side electrode carefully.
The gap should be:
0.039 – 0.043 in (1.00 – 1.10 mm)
8.
With the plug washer attached, thread the spark plug in by hand
to prevent cross-threading.
9.
Tighten the spark plug:
• If the old plug is good:
1/8 turn after it seats.
• If installing a new plug, tighten it twice to prevent loosening:
a) First, tighten the plug:
b) Then loosen the plug.
c) Next, tighten the plug again:
1/8 turn after it seats.
NGK: 3/4 turn after it seats.
DENSO: 1/2 turn after it seats.
(1) spark plug cap
(2) center electrode
(3) side electrode
(4) spark plug gap
0.039 – 0.043 in
(1.00 – 1.10 mm)
LEFT SIDE
(1)
(2)
(3)
(4)
17MY TRX420FE1 31HR3830.book Page 152 Monday, September 19, 2016 1:43 PM
Loading ...
Loading ...
Loading ...