Schwinn 570E ELLIPTICAL ASSEMBLY MANUAL / OWNER’S MANUAL

Loading ...

Condition/Problem Things to Check Solution

Knocking sound during

machine operation

Check hardware at

junction between Lower

Handlebar Arm and Pedal

Make sure that the alignment tab on the Pivot Sleeve goes into

theslotinthehole.BesurethePivotSleeveextendsthrough

the opposite hole in the joint cover.

Squeaking noise

that appears a few

minutes into a workout

and normally will get

progressively worse as

the workout continues

Bolt that connects the

swingarmstotheaxle

running through the

console mast

Loosen pivot rod bolt slightly until noise goes away. White

lithiumgreasecanalsobeappliedforatemporaryx.Contact

your local distributor for assistance.

Roller squeaking on rail Apply silicone lubricant to a dry cloth and wipe the rails to

eliminate roller noise.

Knocking sound during

machine operation.

Check hardware at

junction between Lower

Handlebar Arm and Pedal.

Make sure that the alignment tab on the Pivot Sleeve goes into

theslotinthehole.BesurethePivotSleeveextendsthrough

the opposite hole in the joint cover.

Incline assembly sticks/

difculttoadjust

Check position of incline

assembly

Adjust levelers to raise the front of rail assembly until there

is 0.6cm - 1.25cm (1/4” - 1/2”) space between the top of the

incline assembly and the main unit shroud.

Loading ...

Schwinn 570E Elliptical