Loading ...
Loading ...
Loading ...
Black plate (189,1)
北米Model "A2520BE-C" EDITED: 2015/ 10/ 5
to “Select lever/gear position indicator”
F3-30.)
5) Telltale screen (refer to “Telltale screen”
F3-38.)
6) Odometer (refer to “Odometer” F3-8.)/
double trip meter (refer to “Double trip
meter” F3-9.)
Control switch
1) Up (select)
2) Set (enter)
3) Down (select)
& Basic operation
By operating “ ” or “ ” of the control
switch, the screens and selection items
can be switched. When the “
/SET”
switch is pulled toward you, the item can
be selected and set.
If there are some useful messages, such
as vehicle information, warning informa-
tion, etc., they will interrupt the current
screen, and appear on the display accom-
panied by a beep. If such a screen is
displayed, take proper action according to
the message shown on the screen.
The warning screen will return to the
original screen after a few seconds. While
the “
” information reminder is shown on
the display, it may be possible to display
the warning screen again. To recall the
message marked with “
” on the display,
pull the “
/SET” switch on the steering
wheel toward you.
& Welcome screen and Good-
bye screen
When the driver’s door is opened and
closed a fter unl ocking the door, the
welcome screen will appear on the multi
information display for approximately 20
seconds.
When the ignition switch is turned to the
“LOCK”/“OFF” position, the multi informa-
tion display gradually turns off (Good-bye
screen).
NOTE
. The basic screen will be shown
when the ignition switch is turned to
the “ON” position while the welcome
screen is displayed.
. Once the welcome screen appears,
it takes a certain period of time to
display it again.
. If the ignition switch is operated
after unlocking the driver’s door, the
welcome screen will not appear even
when the driver’s door is opened and
closed.
. The welcome screen will disappear
when you lock the driver’s door by
using the remote keyless entry system
(all models) or the keyless access
function (if equipped) while the wel-
come screen is displayed.
. If any of the doors (including the
rear gate) is opened while the welcome
screen is dis played, the d oor ajar
warning will appear.
. The welcome screen can be set to
on or off. For details, refer to “Welcome
Screen” F3-42.
. The Good-bye screen can be set to
on or off. For details, refer to “Good-
bye Screen” F3-42.
Instruments and controls/Multi information display
– CONTINUED –
3-35
3
Loading ...
Loading ...
Loading ...