Loading ...
Loading ...
Loading ...
Operation
40
Display of program duration
The duration of the program selected
appears in hours and minutes in the
display before the program begins. If
the door is opened during the program,
the time left until the end of the program
is displayed.
The displayed duration may vary for the
same program. It is influenced by, for
example, the temperature of the incom-
ing water, the reactivation cycle of the
water softener, the detergent type, the
amount of dishware, and how soiled it
is.
When a program is selected for the first
time, the display will show the average
program duration for a cold water con-
nection.
The program durations shown under
“Program overview” refer to standard
test loads and temperatures.
Each time a program is run, the control
module calculates the program duration
required depending on the temperature
of the water taken into the dishwasher
and the amount of dishware.
Starting a program
Start the program by closing the door
within 4seconds of the last press of a
button.
Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
Loading ...
Loading ...
Loading ...