Loading ...
Loading ...
Loading ...
5. CLEANING AND
MAINTENANCE
To clean the washing machine exterior, use
a damp cloth, avoiding abrasives, alcohol
and/or solvents. To maintain a good wash
performance we recommend that the soap
drawer and pump filters are regularly
cleaned. A monthly service wash, using a
proprietary cleaner is also recommended.
!
We recommend you clean the drawer to avoid
accumulating detergent and additive residue.
!
To do this, extract the drawer using slight
force, clean it with running water and
reinsert it in its housing.
!
Ensure the siphon cap is correctly refitted.
!
The washing machine comes with a
special filter able to trap large residue,
such as buttons or coins, which could
clog the drain (according to the model,
consider version A or B).
!
ONLY AVAILABLE ON CERTAIN MODELS:
pull out the corrugated hose, remove the
stopper and drain the water into a
container.
!
Ensure all the water has been emptied
from the drum.
!
Before unscrewing the filter, we
recommend you place an absorbent cloth
under it to keep the floor dry. A small
amount of water will come out of the filter
as you remove it - this is normal.
!
Turn the filter counter-clockwise to the
limit stop.
!
Remove and clean the filter; when
finished, replace it turning it clockwise.
The filter handle will be locked when it is
not possible to turn any further and the
handle is horizontal. Smearing a small
amount of liquid soap on the filter seal will
help refitting.
!
Repeat the previous steps in reverse
order to reassemble all parts.
B
A
!
Should the washing machine be stored in
an unheated room for a long period of
time, drain all water from tubes.
!
Unplug the washing machine.
!
Detach the tube from the drainage system
and clip on the rear of the machine and
lower it, fully draining water into a bowl.
! Secure the drain tube with the drainage
system and clip on the rear of the
machine when finished.
!
Keep the door glass and gasket clean.
Drawer cleaning
Filter cleaning
Suggestions for moves or
prolonged disuse
The manufacturers warranty only
covers faults within the product of a
mechanical or electrical nature. Faults
caused by handling, installation or miss
use are not covered and may incur a
charge for any repair visit to resolve.
!
10
Loading ...
Loading ...
Loading ...