Loading ...
Loading ...
Loading ...
Important Safety Instructions
11
EN
• It is the customer’s responsibility:
1 To contact a qualified electrician.
2. To ensure that the electrical system is
adequate and in compliance with the
National Electrical Code ANSI / NFPA
70 Electrical Code – latest edition – Or
the CANADIAN ELECTRICAL CODE,
C22.1 – 1982 and C22.2 No. 01982
– or latest edition – and all local codes
and ordinances.
• Always check that the controls are in the
"zero" (off) position when the appliance
is not in use.
• Use only pots or pans with a perfectly
smooth, flat bottom on the appliance
surface burners. NEVER USE THE
APPLIANCE AS A WORK SURFACE.
• Do not attempt to repair or replace any
part of this appliance unless specifically
recommended in this manual. All other
servicing should be done by a qualified
technician.
• Never use any part of the appliance for
storage. Flammable materials can ignite
and plastic items may melt or burst into
flame.
• Do not hang articles on any part of the
appliance or place anything against it.
Some fabrics are extremely flammable
and could ignite.
• Never leave the appliance unattended
when using high heat settings. Boilover
can cause smoke and spattered grease
can ignite.
• Not all types of glass, thermally resistant
glass-ceramic, ceramic, earthenware, or
other glazed cookware are suitable for
appliance use. This type of cookware
can break with sudden temperature
changes. Use only on low or medium
heat settings in accordance with the
instructions supplied by the
manufacturer.
• DO NOT HEAT UNOPENED FOOD
CONTAINERS: A buildup of pressure
can cause the containers to burst.
• DO NOT USE FLAMMABLE
PRODUCTS TO CLEAN THE
APPLIANCE.
• Be sure all the surface burner controls
are turned off and that the appliance is
cool before using any type of cleaning
product. The chemical elements in these
products could, in the presence of heat,
ignite or cause metal parts to corrode.
• If the cooktop is near a window, forced
air vent or fan, be certain that flammable
materials such as window coverings do
not blow over or near the burners or
elements. They could catch on fire.
• ONLY QUALIFIED SERVICE
PERSONNEL SHOULD PERFORM
REPAIRS. Service personnel must
disconnect the power supply before
servicing this unit.
• Maximum burner flame size should be
adjusted so it does not extend beyond
the bottom of the pan.
• Remove all packing materials and
temporary labels from the appliance.
• The Model and Serial numbers are on
the appliance ID plate. The ID Plates are
visibly located on the back of the
appliance. THE ID PLATE MUST NOT
BE REMOVED.
Loading ...
Loading ...
Loading ...