Loading ...
Loading ...
Loading ...
6 EN
3 Get started
Caution
• Useofcontrolsoradjustmentsorperformance
of procedures other than those specified herein
may result in hazardous radiation.
Always follow the instructions in this chapter
in sequence.
If you contact Philips, you will be asked for the
model and serial number of this speaker. The
model number and serial number are on the
back of the speaker. Write the numbers here:
Model No. ________________________
Serial No. ________________________
Prepare telescopic antenna
For optimal reception, fully extend and adjust
the direction of the telescopic antenna.
Tip
• Positiontheantennaasfarawayaspossible
from your TV or other radiation source to
prevent interference.
Connect power
Caution
• Riskofproductdamage!Makesurethatthe
power supply voltage corresponds to the
voltage on the back or the underside of the
product.
• Riskofelectricshock!WhenyouunplugtheAC
power cord, always pull the plug from the
socket. Never pull the cord.
• UseonlytheACpowercordspecifiedbythe
manufacturer or sold with this speaker.
Note
• Thetypeplateislocatedonthebackofthe
speaker.
Connect the AC
~
socket on the speaker and
the power socket on the wall with the AC
power cord.
Adjust display brightness
1
In standby mode, press and hold the small
knob on the right side for 2 second or more
to display the menu.
2
Rotate the big knob on the right side to
select the menu "DIM".
3
Press the small knob on the right side to
confirm your select.
4
Rotate the big knob on the right side to
select different levels of display brightness.
Set the Clock
1
In standby mode, press and hold the small
knob on the right side for 2 second or more
to display the menu "CLOCK".
2
Press the small knob on the right side to
confirm to activate the clock setting
mode,
the time format
[12H] or [24H]
begins to
blink
.
3
Rotate the big knob on the right side to
select [12H] or [24H].
4
Press the small knob on the right side to
confirm, the hour digits begin to blink.
5
Repeat
above
steps 3-4 to set the hour and
minute.
Note
• Ifnobuttonispressedin10seconds,the
speaker exits clock setting mode automatically.
Loading ...
Loading ...
Loading ...