Loading ...
Loading ...
Loading ...
- 12 -
Fig.4
3. CONNECT THE DUCTWORK:
ANSI/NFPA 70-1999.
5. Insert the wires into the box, then close the box cover, securing it using the screws
that were previously removed.
The appliance should be installed at a
minimum height of 27" up to a maximum
height of 32" for optimal performance.
If a connection ductwork composed of
two parts is used, the upper part must
be placed outside the lower part. Do not
connect the range hood exhaust duct air
to the same duct air used to exhaust hot
air or fumes from other appliances other
than electrical. Before proceeding with
the assembly operations, remove the an-
ti-grease lter(s) (Fig.4) so that the unit
is easier to handle.
Loading ...
Loading ...
Loading ...