WD13050SD Washing Machine - Front Loader Washing Machine - - Lg Electronics Australia

User Manual - Page 14

For WD13050SD.

PDF File Manual, 36 pages, Read Online | Download pdf file

WD13050SD photo
Loading ...
Loading ...
Loading ...
14
(1) POWER ON/OFF BUTTON
Press to turn the washer ON. Press again
to turn the washer OFF.
(2) CYCLE SELECTOR KNOB
Turn this knob to select the desired cycle.
Once the desired cycle has been
selected, the standard presets will be
shown in the display. These settings can
be adjusted using the cycle setting
buttons anytime before starting the cycle.
(3) START/PAUSE BUTTON
Press this button to START the selected
cycle. If the washer is running, use this
button to PAUSE the cycle without losing
the current settings.
(4) STEAM BUTTON
Press the STEAM button to add steam to
the selected cycle for added cleaning power.
(5) CYCLE SETTING BUTTONS
Use these buttons to select the desired
cycle options for the selected cycle. The
current options are shown in the display.
Press the button for that option to view
and select other settings.
(6) DELAY BUTTON
Press this button to delay the start of the
wash cycle. Each press of the button
increases the delay time by one hour, up
to 19 hours.
(7) LCD DISPLAY
The display shows the settings, estimated
time remaining, options, and status
messages for your Steam Washerâ„¢. The
light in the display will remain on through
the cycle.
(8) SPECIAL FUNCTION BUTTONS
The special function buttons allow you to
select additional functions and will light
when selected. Certain buttons also allow
you to activate secondary functions by
pressing and holding the button for 3
seconds.
For detailed information about the
individual functions, please see the
following pages.
(9) OPTION BUTTON
Press this button to select additional cycle
options such as WATER PLUS, PRE
WASH, EXTRA RINSE, STAIN CYCLE,
and SPINSENSEâ„¢.
Press the button next to the desired option
in the display to select. The button will
light to show the option has been
selected.
ow to use washer
H
NOTE
Pressing the ON/OFF button during a cycle
will cancel that cycle and any load
settings will be lost.
NOTE
If you do not press the START/PAUSE button
within 8 minutes of selecting a cycle, the
washer automatically turns off.
NOTE
Steam can only be added to the following cycles:
Refresh, SANITARY, BULKY/LARGE, PERM.
PRESS, COTTON/NORMAL, and Allergy care
(1) (2) (3)
(4) (6)(7)(8)
(5) (9)
(8)
Loading ...
Loading ...
Loading ...