Zanussi ZNNN18FS5 Integrated Fridge Freezer

User Manual - Page 17

For ZNNN18FS5.

PDF File Manual, 20 pages, Read Online | Download pdf file

ZNNN18FS5 photo
Loading ...
Loading ...
Loading ...
Problem Possible cause Solution
The door is not closed correct-
ly.
Refer to "Closing the door"
section.
The food products' tempera-
ture is too high.
Let the food products temper-
ature decrease to room tem-
perature before storage.
Many food products are stored
at the same time.
Store less food products at the
same time.
The door has been opened of-
ten.
Open the door only if necessa-
ry.
The FastFreeze function is
switched on.
Refer to "FastFreeze function"
section.
The FastCool function is
switched on.
Refer to "FastCool function"
section.
There is no cold air circulation
in the appliance.
Make sure that there is cold air
circulation in the appliance.
Refer to "Hints and Tips" chap-
ter.
DEMO appears on the display. The appliance is in demonstra-
tion mode.
Keep the OK key pressed for
approximately 10 seconds until
a long sound is heard and the
display turns off for a short
time.
A or or symbol is
shown instead of numbers on
the temperature display.
Temperature sensor problem. Contact the nearest Author-
ized Service Centre (the cool-
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible).
If the advice does not lead to the
desired result, call the nearest
Authorized Service Centre.
REPLACING THE LAMP
The appliance is equipped with a longlife LED
interior light.
Only service is allowed to replace the lighting
device. Contact your Authorised Service Centre.
CLOSING THE DOOR
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
installation instructions.
3. If necessary, replace the defective door
gaskets. Contact the Authorised Service
Centre.
17
Loading ...
Loading ...
Loading ...