Loading ...
Loading ...
Loading ...
9
After self-cleaning
- Plug the iron into the mains to dry up the soleplate.
- When the amber pilot light (E) goes off, unplug the iron.
- Move the iron gently over a piece of used cloth to remove water stains. Cool down
the iron for storage.
Cleaning
- Before cleaning remove the mains plug from the wall socket and allow the iron to
cool down sufficiently.
- Scale and other stains can be wiped off the soleplate with a damp cloth and a
non-abrasive (liquid) cleaner.
Keep the soleplate smooth: avoid hard contact with metal objects.
- The upper part of the appliance can be cleaned with a damp cloth.
- From time to time clean the inside of the water reservoir by filling with water and
shaking (fig. 15). Then pour the water back out (fig. 16).
Storage
- Remove the mains plug from the wall socket.
- Pour any remaining water out of the water reservoir (fig. 16).
- Set the Steam control (B) to position O (fig. 2).
- Stand the iron upright and let it cool down sufficiently.
- Wind the mains cord around the cord storage (fig. 17).
- Always store the iron standing on its heel (fig. 18).
- Always keep the iron in a safe dry place.
Regularly check if the mains cord is still in a good and safe condition.
Environment
• Do not throw the appliance away with the normal household waste at the end of
its life, but hand it in at an official collection point for recycling. By doing this you
will help to preserve the environment (fig. 19).
Loading ...
Loading ...
Loading ...