Loading ...
Loading ...
Loading ...
Features of your new dishwasher
How your dishwasher cleans
Your dishwasher cleans by spraying
a mixture ofhot water and detergent
through the spray arms
The dishwasher fills with water
covering the filterarea. Water is then
pumped through the multiple filter
and spray arms.Separated soil
particles go down the drain as the
water is pumped out and replaced
with clean water.
The number of water fills will vary
with the cyclebeing used.
against
soiled surfaces .
Getting Started
1.Load dishwasher (See preparing and
loading dishes).
2.Add detergent (See Fill detergent to the
dispenser).
3.Add rinse aid, if needed (See Fill rinse to
dispenser).
4.Select desired CYCLE (See Cycle Chart).
The indicator light that b eside the pad
will glow whenselected.
5.Select desired FUNCTIONS, the indicator light
that b eside the pad will glow whenselected.
6.To start, press
Start/Cancel(See Start/Cancel)pad.
7.Close the door,then the machine will
start to work.
Note:
1.Your dishwasher has the top control
panel. The door should be opened first
if you want to operate the machine.
2.To start a cycle, the door must be closed
within 4s after press Start/ Cancle.
Wash Cycle Selections
Cycle times are approximate and will vary
with options Selected.Hot water is
necessary to activate dishwasher detergent
and melt fatty food soils.
An automatic sensor will check the incoming
water temperature and if it is not hot
Enough,the timer will be delayed for
automatic water heating in the main wash of
all Cycles.This happens even when
HI-TEMP WASH is selected an even higher
temperature will be guaranteed to handle
heavier soil loads.
4
Loading ...
Loading ...
Loading ...