NutriBullet NB9-1301 Blenders

User Manual - Page 4

For NB9-1301.

PDF File Manual, 19 pages, Read Online | Download pdf file

NB9-1301 photo
Loading ...
Loading ...
Loading ...
54
wider than the other) to reduce the risk of electric shock. This plug will correctly
fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. For your
safety, do not modify the plug or Motor Base in any way. reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify the plug in any way, as
doing so will void the warranty.
The use of attachments, including canning jars, is not recommended and may
cause fire, electric shock, personal injury, or product damage and will void the
warranty.
T
o avoid risk of electric shock, never immerse the Cord, Plug, or Power Base of
blender in water or other electrical current conducting liquids. Discontinue use if
the Cord, Plug, or Power Base is damaged.
Always POWER OFF and UNPLUG the NutriBullet® when it is not in use or BEFORE
assembling, disassembling, changing accessories, or cleaning. Do not attempt
to handle the NutriBullet® until all parts have stopped moving.
P
eriodically inspect all NutriBullet® components for damage or wear that may
impair proper function or present an electrical hazard. Assure that power cord
and plug are undamaged. Discontinue use and replace Blending Containers if
you detect cracking, crazing, cloudiness or damage to the plastic. Assure that
the Blades rotate freely and that the gasket is seated and undamaged. Assure
that Power Base switch actuators are unobstructed, clean, and depress easily.
Follow maintenance in User Manual and never operate your NutriBullet® with
damaged components. If your NutriBullet® malfunctions in any way, immediately
discontinue use and contact NutriBullet Customer Service at (855) 346-8874.
Do not allow the cord to hang over the edge of the table or counter. Do not
pull, twist, or damage the power cord. Do not allow cord to touch hot surfaces,
including the stove.
If the mot
or stops working, unplug the Power Base and let it cool for an hour
before attempting to use it again. Your NutriBullet® has an internal thermal
breaker that shuts off the motor when it overheats. The thermal breaker will reset
when the unit is unplugged and the thermal breaker cools down sufficiently.
VENTILATION SAFETY
To prevent a fire hazard, the openings on the bottom of the Power Base should
be free of dust or lint and never obstructed as they are provided for ventilation
to ensure reliable motor operation to prevent over-hearing. Never place your
NutriBullet® on top of flammable materials such as newspapers, tablecloths,
napkins, dishtowels, place mats or other similar type of materials.
• Always operate the
NutriBullet®
on a level surface, leaving unobstructed space
beneath and around the Power Base to permit proper air
circulation. Slots on the bottom of the Power Base are provided for ventilation to
ensure reliable operation and to prevent motor over-heating
.
MICROWAVE & STOVE-TOP HEATING SAFETY
DO NOT BLEND HOT INGREDIENTS! After blending room temperature or cooler
ingredients (21°C/70°F or less), transfer mixture to an unsealed, microwave-safe
container or to a stove-top pot to heat. Always use a thermometer to test the
internal temperature of cooked ingredients, they may feel cool to the touch, but
still be hot inside.
Do not place an
y of the NutriBullet® parts in a microwave, oven or stove-top pot
or immerse in boiling water as this may result in damage to the accessory.
MEDICAL SAFETY
• The information contained in this user guide is not meant to replace the
advice of y
our physician. Always consult your physician regarding health and
nutrition concerns.
MEDICATION INTERACTIONS:
• If you are taking any medication, especially cholesterol lowering medication,
blood thinners, blood pressure drugs, tranquilizers, or antidepressants, please
check with your physician before trying any of the smoothie recipes contained in
this guide.
BAD SEEDS: DO NOT USE THE FOLLOWING SEEDS OR PITS IN THE NUTRIBULLET®,
AS THEY CONTAIN A CHEMICAL THAT RELEASES CYANIDE INTO THE BODY WHEN
INGESTED: APPLE SEEDS, CHERRY PITS, PLUM PITS, PEACH PITS AND APRICOT PITS.
ADDITIONAL TIPS FOR PROPER USE
TO AVOID LEAKAGE, DO NOT OVERFILL THE CUP! Make sure ingredients and liquid
do not exceed the MAX line. The Cyclonic Action® of the NutriBullet® requires
room to extract effectively and exceeding the MAX line can result in leakage
and may create a dangerous pressurization which can cause the vessel and
blade assembly to separate.
Cup and extr
actor blades are specific to the exact model of NutriBullet®. Use
of incompatible parts (parts from other models) may result in damage to your
NutriBullet® or create safety hazards. When replacing Cups or an Extractor
Blade or ordering additional accessories from NutriLiving.com, or by contacting
Customer Srevice, please specify the model for parts that are compatible with
your unit.
P
eriodically inspect your NutriBullet® and its components for damage or wear
that may impair proper function. Discontinue use and replace components if
you detect cracking, crazing or cloudiness or other damage to the vessel, tabs
on the vessel, Actuator tabs of the Power Base. You may purchase new Cups
and Extractor Blades at NutriLiving.com or by contacting Customer Service. WE
RECOMMEND REPLACING YOUR CUP EVERY SIX MONTHS.
NUTRIBULLET CLEANING & USER MAINTENANCE INSTRUCTIONS
Cleaning the NutriBullet® is easy, simply place any of the pieces (except for the
Power Base and Extractor Blade) on the top shelf of the dishwasher or hand wash
with warm soapy water and rinse.
HERE’S HOW TO CLEAN THE NUTRIBULLET®:
STEP 1: The most important thing — ALWAYS POWER OFF and UNPLUG the Power
Base from the power supply outlet when it is left unattended, before assembling,
disassembling, changing accessories or approaching parts that move in use
or when cleaning. Do not attempt to handle the appliance until all parts have
stopped moving!
STEP 2:
Make sure the Cup / Extractor Blade is not attached to the Power Base.
STEP 3: Cleaning the individual components (Power Base, Extractor Blades,
NutriBullet Cups) as follows:
NUTRIBULLET, LLC
Loading ...
Loading ...
Loading ...