Loading ...
Loading ...
Loading ...
71
E:\SONY\2659811111\01US07TBS.fm
DCR-HC26
2-659-811-11(1)
Troubleshooting
You cannot use [EXPOSURE].
• You cannot use [EXPOSURE] together with NightShot plus.
• If you set [PROGRAM AE], [EXPOSURE] is automatically set to [ AUTO].
You cannot use [WHT BAL].
• You cannot use [WHT BAL] together with NightShot plus.
You cannot use [PROGRAM AE].
• You cannot use [PROGRAM AE] together with NightShot plus.
Time code and other information appear on the display of the connected
device.
• Set [DISP OUT] to [LCD] while connected with an A/V connecting cable (p. 48).
You cannot dub correctly using the A/V connecting cable.
• The A/V connecting cable is not connected properly. Make sure that the A/V connecting
cable is connected to the input jack of another device for dubbing a picture from your
camcorder (p. 49).
New sound added to a recorded tape is not heard.
• Adjust [AUDIO MIX] from the [ST1] (original sound) side until the sound is heard
appropriately (p. 53).
Pictures from connected devices are not displayed correctly.
• The input signal is not NTSC (p. 79).
The computer does not recognize your camcorder.
• Disconnect the cable from the computer and camcorder, then connect it again securely.
• Disconnect USB devices other than the keyboard, the mouse, and the camcorder from the
(USB) jack on the computer.
• Disconnect the cable from the computer and camcorder, restart the computer, then connect
them again correctly.
An error message appears when you place the supplied CD-ROM in your
computer.
• Set the computer display as follows:
– Windows: 800 × 600 dots or more, High Color (16 bits, 65,000 colors) or more
– Macintosh: 1,024 × 768 dots or more, 32,000 colors or more
Dubbing/Editing/Connecting to other devices
Connecting to a computer
Continued ,
Loading ...
Loading ...
Loading ...