Loading ...
Loading ...
Loading ...
11
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the
previous temperature settings. When power is recovered, the cabinet will return to the same set
temperature as before the power went off.
TEMPERATURE ALARM / DOOR ALARM
An audible alarm sounds if the storage temperature is not cold enough. The temperature display
flashes at the same time.
The cause of the temperature being too high may be:
- Warm items were placed inside
- Too much warm ambient air flowed in when rearranging or removing contents
- Power failure for some time
- The appliance is faulty.
The audible alarm is automatically silenced and the temperature display stops flashing when the
temperature is sufficiently cold again.
If the door has been left open for more than 60 seconds, the alarm will sound. Pressing the
POWER key once can switch off the audible alarm.
for models SCR610BL*, SCR611GLOS* & SCR1156*:
This unit is set to display temperature in Fahrenheit (ºF). If you prefer Celsius, you can contact our
technical support team (718-893-3900) for instructions on changing the display.
To see the SET POINT:
The default display for your digital thermostat is the internal cabinet temperature. To view the unit’s set
point, push and immediately release the SET key. The display will flash, showing the set point value. If no
other actions are taken in 6 seconds, the display will revert to the internal air temperature.
To change the SET POINT:
While the set point value is blinking, press the UP or DOWN arrow to change the set point to your desired
temperature. Press the SET button again to exit the adjustment. The display will revert to the internal air
temperature.
LIGHT
This unit is equipped with LED lighting that will automatically illuminate when the door is opened,
and turn off when the door is closed. If you prefer to keep the lighting on even with a closed door,
press the rocker switch located in your unit’s kickplate.
Note:
Details may vary
from image.
Loading ...
Loading ...
Loading ...